Track Building and BuyingShorten a Drag Tracks section...

  • Jump to last reply

I used a section of track to make a DT to HW adaptor... then made them much cheaper... the old ones are now being recycled...

 Connector removed, the  DT section with the gussets removed will tape onto a DT finish line to support a towel...

 The connector I removed will glue or screw under a DT section to shorten it to the desired length...

 

Hey Smitty,

I'll have to take pics of them...the way that I shortened...or lengthened...my track sections was to cut two sections in half and reglue them together either shorter or longer (and reenforced the joint with plastic). Like I said, I'll take pics!

model40fan
thanks c10.. our readers and i like to see the pics
72_Chevy_C10
I'll try to remember to take pics tonight :)

Hey Smitty, here are the promised pics...

This is a 25" section next to a standard 20" section...

http://i1074.photobucket.com/albums/w407/critterwerks/Mobile%20Uploads/20150205_211649_zpsrxp1jbtm.j...

Here is the back of that piece....the white pieces are just some plastic scraps glued over the joint to reinforce it...

http://i1074.photobucket.com/albums/w407/critterwerks/Mobile%20Uploads/20150205_211712_zpswtgb6jvq.j...

And here is the top...

http://i1074.photobucket.com/albums/w407/critterwerks/Mobile%20Uploads/20150205_211721_zpslrzjzkug.j...


model40fan
nice, gives you any length you want... thanks c10
Traction-Event
I need a 4-5in track section...then i could have my true scale 1/4 mile...hmmm

Share your thoughts

You must login to make a reply