Covering Open Windows

RacerGnome Saturday, 10/17/2026

Ran into something recently and have read what I can find on the subject, but nothing to specific.  Is there a method or common way to block/cover up an 'open' window?  I have had a couple of builds recently that had open windows and one, I left it alone, and another I added some foam pieces from the electronic parts to block the window, but I wondered if there was a 'normal' way others block their windows that are default open with no glass (plastic) so they can add weight inside the car and not see the weight.

For my next car, I was thinking of cutting some plastic from the main line car package the size of the triangled window opening, then lightly E6000 the edge to hold it on the inside.  Then add tape across the inside so none of it shows and maybe tighten the window plastic to the opening a bit securely.

Another idea was to cut some old screen material that I think I have somewhere and similary do the same thing with glue and tape to secure it inside the car.

Is there other methods or common ways I should be looking at so when these issues come up of closing off a window, I will know the go-to way that others have already solved as routine?

Would hate to re-invent the wheel when others just say do XYZ with ABC and "Bob''s your uncle!".


Discussion

View member profile
SpyDude 10/17/26

Either one of those ideas would work. I have some old patches from a screen door that sometimes get used as window mesh, mostly for my post-apocalytic builds.You could also cut a piece of foam to fit and simply paint it black to simulate windows, and then stuff weights underneath.


  • Sponge type material from some electronic packaging is what I used before. Was able to get a bit tight to the inside window so it hopefully stayed in place during that race event. The hard part is the gluing/adhering whatever material to the inside of the car. I do like the plastic in some form to give it a window type look at a view. — RacerGnome

Have you tried just painting the interior and weights flat black? If it just a matter of hiding the weights flat black works great.

Otherwise your approach is just fine.


  • Yup — RayRaySugar
  • Have not looked at painting weights, but am now with this car. This car has a nice section where the seats and steering is that I would like to place a little weight, but is viewable from the outside without a window covering. This car will need a covering so you won't be able to see the weights. — RacerGnome
  • Flat black is great. Been using it since day 1. Cheers — CutRock_R_Marc_D
View member profile
Chaos_Canyon 10/17/26

I have used a small piece of clear plastic, like from a HW blister pack, and used that to fake windows before.


  • Yup — RayRaySugar
  • Yes, and I like that approach too because the material can resemble a window. The attaching of the inside seems a bit tricky, but like anything after you do it a couple of times, should be easier and better quality installs. — RacerGnome
  • Yep, have done that too. Easy fix. Cheers — CutRock_R_Marc_D
  • RacerGnome - if you make the window deeper than it needs to be, you can easily glue the bit you don't see to the inside of the door, making it much easier to place. — Chaos_Canyon
View member profile
RayRaySugar 10/18/26

A small piece of strong tape like duct tape stuck to the inside and then painted flat black is easiest. It's much easier than anything else. If it's not a drag race I just paint the entire interior flat black.

View member profile
dr_dodge 10/18/26

I have made beds, bed covers grills, and no glass window blackouts out of minilla folder stock
indusrtial paper mache'
take thin printer paper, get a crude pattern, now wet it w/ elmers school glue
mash it into where the the glass of the car should be,
or
outter skin the glass, same process, make it long
let dry, use as pattern cut apart for folder cutout,

get this one wet, no glue, just water.
form into body making sure the edges are all push tight, allow to dry
when dryish coat inside w/glue
let dry pop out of body, paint outside w/ wood glue and paint

but I do things a bit differently

dr




  • I like it. Hadn't considered moisturizing with water like that to form a window. — RacerGnome
to join the conversation or sign-up now