Guidance sought with track corners

El_Marto Friday, 11/20/2026

Hi brains trust - very new - trying to convert my marble run (which worked) but having no success with cars they keep stopping on the curves - cars are ok on hotwheels track- I have tried to bank the curves but no real success - are curves wrong, are straightaways to short or shallow,  is surface to slippery?

Length 6 ft x depth 3ft height about 32 inches construction MDF & glossy cardstock


Discussion

Could be they aren't steep enough, or need to be banked if they hit the sides before stopping.  Depends on what is happening when they stop. Chaos Canyon has had similar setups, you might review some of their older videos to see how they run them. 
Good luck!!


  • Thanks - I'll try to steepening the banking — El_Marto
  • I've given close attention to many tracks - Chaos is across the ditch from me so I figure he may have had similar material issues as me — El_Marto

Looks like foam side walls...?   Maybe cars are stopping in that...getting hung up in the foam.


  • Thanks - the sidewall was OK with marbles bouncing about - I may remove it & try something else — El_Marto

Looks like too much friction on the sidewalls plus the turns could probably use a bit more banking, as well as the overall downward slope of the track could be too low. Good luck!

to join the conversation or sign-up now